Keep Your Home and Family Clean Using Quality Water Heaters in Lubbock

One of the most important, but often overlooked appliances are Water Heaters Lubbock. A water heater is required for both household cleaning and personal hygiene. The most common type of water heater is the storage based system. These units range in size from ten gallons to over a hundred gallon capacity. The average home uses a forty gallon water heater. The system works by heating water inside the tank and keeping it hot until it is needed. Some people consider this a waste because they don’t use hot water all day long. However, attempting to heat water only when you need it can be a time consuming task.

Water Heaters Lubbock come in both gas and electric heating models. Gas based water heaters actually heat the bottom of the tank while the electric models use one or more electrodes placed inside the tank. Electrical resistance is an efficient method of water heating which doesn’t require exposing the metal of the tank to the heat source. This makes an electric water heater the perfect candidate for newer lining options such as glass or cement. Lining the inside of the water tank is done to help the tank last longer. Glass lining provides a great cover for most of the tank, but it doesn’t always cover the fittings properly. Cement is the preferred option because it covers the tank evenly.

One alternative to storage based Water Heaters Lubbock is the inline or tankless water heater. These appliances come in whole house models or small units that can be installed under the cabinet or by a tub or shower. Smaller tankless water heaters are the perfect solution for additional hot water requirements. For example, when you fill the tub for a nice long soak, but the hot water runs out about half way. An inline water heater would allow you to add all the heated water you need.

It is important to check your water heater occasionally. You want to inspect the tank for leaks and test the pressure valve. Water Heaters Lubbock come with a safety valve that is designed to release excess pressure from the tank. This is an important feature designed to avoid unexpected explosions. These problems occur because heated water causes a pressure buildup inside the tank and if the pressure gets too high then the tank might burst.

12908058_l       images

1 person likes this post.

Share!

    Leave a Reply

    Your email address will not be published. Required fields are marked *

    twelve + four =

    Shares