Almost anyone can pour concrete and make a driveway. The problem is that it has to be done right. If you fail to install it properly, you will see cracks begin to develop. This typically happens due to a failure to install concrete expansion joints. Learn how to add expansion joints to keep your driveway in perfect shape.
A Further Look at the Problem
There is a little more to know about concrete cracks. This cracking is likely to occur anytime there are changes in temperature. Thus, going from one season to another is likely to create issues with cracking. Cracks also happen when the concrete finishes curing. This is due to the shrinkage of the material. Therefore, it is important to pay attention to concrete expansion joints.
Getting Started
You should focus on using ready-made joints for the gaps between slabs. In order to choose the right ones, be sure to select a height that matches the height of the concrete. In some cases, you may have to trim the joints to make them fit properly. The next step is to wait for the pouring process to add the joints.
Adding Joints
While pouring concrete, you will carefully place the joints into position. Be sure to put the joint against the edges of the form structure. This will make sure that it aligns with the concrete slab. Afterwards, allow the concrete to become hard so that it attaches to the joint. You will also have to employ a joint trowel to ensure that there is enough space between the slabs. This extra room will help the concrete change size when contracting and expanding.
Overall, there are several more steps to performing a professional driveway job. Be sure to pick the right expansion joints to make it easier. For more assistance with expansion joints, contact Trim-A-Slab at trim-a-slab.com.